Performance characteristics

-Unique protruding knife edge sprays continuous and controllable airflow
-Visual reference for easy installation
-Droplet shape and improved air entrainment design provide high-speed, stable airflow
-Anti-corrosion, anti-leak end cover design

 Ordering Date

The biggest improvement of the Smait effect air knife is our unique knife edge. Throughout the length range, the knife edge extends 3.3mm along the direction of the wind blowing, allowing the air as a whole to be sprayed out in the form of a straight flow, so that the air flow is more stable. control. This protruding knife edge also improves the entrainment of air on the inner wall of the air knife. The air knife is based on the Smyder effect (the phenomenon that high-speed airflow along the surface of an object can attach to the surface at corners) and air entrainment, providing stable, continuous, and large-scale air entrainment. flow of air. This means you get a consistently higher quality blow drying process.

Instructions

1. Smait stainless steel precision air knife model description example: Model formula: SMDAL①-B-A-C, set the ordering size to 500mm, the knife edge width to 1.5mm, and the air inlet size to 76mm. The correct ordering model is: SMDAL②-76-500-0.8

2. The air inlet selection code is: R. (R1: represents the air intake from one end of the air knife; R2 represents the air intake from both ends of the air knife)

3. When ordering, please pay attention to the effective length A of the air knife, which does not include the thickness of the end covers on both sides of the air knife. In the above case, the length of the air knife ordered is 500mm, which does not include the side end covers. The actual length of its installation size is 510mm.

4. The unique knife edge design of the Smait effect fan (one side is high and the other is short) significantly improves the air knife drying effect. When installing, please be sure to distinguish the direction of the air knife edge installation. One side of the air knife edge is located in the direction where the workpiece needs to be dried. The same goes for the upper and lower air knives, which are installed in a docking manner.

5. When ordering beyond the above data range, please call our company, Tel: +86 0769-83238461