Performance characteristics

-The width of the air outlet is adjustable (minimum 0.1mm)

-All stainless steel SUS304 or 316L material, acid and alkali resistant

-Designed based on aerodynamic principles, with low wind resistance and average wind speed

-Pressure resistance 5kgt/cm2, wind speed up to 400m/s, hot air blowing, temperature resistance 250°C

-Can be used for water drying, isolation curtains, water curtains, etc. to reduce the loss of cold/hot air

Ordering Date

Smait stainless steel precision air knives are widely used in cleaning, blowing and drying circuit boards, electroplated parts, coating film drying, etc., and can also be used as isolation air curtains.
The curved air knife is made of stainless steel, aluminum alloy materials and a patented design manufacturing process. It has the ability to withstand high temperatures, doubling the drying efficiency. It is especially suitable for water removal and drying in different parts industries such as ultrasonic cleaning, coating, glass cleaning machines, circuit boards, electroplated parts, small packages, non-ferrous metal plate/wire production, etc.

 Instructions

1、Smed stainless steel precision air knife model description. Example: Model formula: SMDSUS-B-A-C, set the ordering size to 500mm, the blade width to 0.8mm, and the end air inlet to 76mm. The correct ordering model is: SMDAL②-76-500-0.8

2、The air inlet selection codes are: R, S, T. (R2: represents the air inlet from both ends of the air knife. If multiple air inlets are needed on the side, it will be S2, S3, etc.; it represents the air inlet from the top of the air knife. If multiple air inlets are needed on the top, it will be deduced.)

3、When ordering, please pay attention to the effective length A of the air knife, which does not include the thickness of the end covers on both sides of the air knife. In the above case, the length of the air knife ordered is 500mm, which does not include the side end covers. The actual length of the installation size is 510mm.

4、When ordering beyond the above data range, please call our company, Tel: +86 0769-83238461

...

※Be careful to avoid collision with the knife edge. The medium used should avoid excessively coarse impurity particles to avoid blocking or damaging the knife edge.

※ When the product leaves the factory, the width of the air outlet has been customized and requires calibration. If it is necessary to change it, please send it to the original merchant or a professional for adjustment to avoid weakening the product performance due to self-adjustment.