Performance characteristics

-The main body is made of aluminum alloy 6061 material, and the surface is anodized.
-The width of the air outlet is adjustable (minimum 0.2mm)

-Small resistance, strong wind speed, uniform outlet

-High cost performance, space saving, easy installation

-Temperature resistance 200*C, pressure resistance 2kgf/cm2, can be connected to a heater to blow out hot air

 Ordering Date

Smait's aluminum alloy precision air knife/water jet is used for cleaning, blowing, drying, etc. of circuit boards, electroplated parts, coating films, etc. It can also be used as isolation air curtains, blow molding and chip blowing, etc.
The high-speed air jet/water jet is made of aluminum alloy material, which is corrosion-resistant and rust-proof; the patented manufacturing process delivers a uniform and strong air curtain; the high-temperature resistance can double the drying efficiency. It is especially suitable for ultrasonic cleaning, glass cleaning machines, water removal and drying in various processes in different industries such as circuit boards, electroplated parts, coatings, painting, non-ferrous metal plate/wire production, etc.
​

Features

-The Main Body Of Aluminum Alloy MaterialIs 6061stretch

-Forming,surface Is Anodic Oxidation Treatment

- Outlet Width Is Adjustable (minimum 0.2 Mm)

-Small Resistance,strong Winds,air Flow Is Evenly

-High Cost Performance,space Saving,easy To Install200 ， c Heat Resistance,pressure

2 Kgf/cm2,can Connectheater Blowing Hot Air

Instructions

1、Smait stainless steel precision air knife model description. Example: Model formula: SMDAL ②-B-A-C, set the ordering size to 500mm, the blade width to 0.8mm, and the end air inlet to 76mm. The correct ordering model is: SMDAL②-76-500-0.8.

2、The air inlet selection codes are: R, S, T (R2: represents the air inlet at both ends of the air knife, if multiple air inlets are needed on the side, it is S2, S3, etc.; T represents the air inlet at the top of the air knife, if multiple air inlets are needed on the top The same applies to the air inlet)

3、When ordering, please pay attention to the effective length A of the air knife, which does not include the thickness of the end covers on both sides of the air knife. In the above case, the length of the air knife ordered is 500mm, which does not include the side end covers. The actual length of the installation size is 510mm.

4、When ordering beyond the above data range, please call our company, Tel: +86 0769-83238461

※Be careful to avoid collision with the knife edge. The medium used should avoid excessively coarse impurity particles to avoid blocking or damaging the knife edge.

※ When the product leaves the factory, the width of the air outlet has been customized and requires calibration. If it is necessary to change it, please send it to the original merchant or a professional for adjustment to avoid weakening the product performance due to self-adjustment.